MXS20-100B气动滑台

2023-05-31 作者 dustry003 0

MXS20-100B精密滑台(交叉滚柱轴承) – 标准型
MXS20-100B是一款精密滑台,与导轨和导轨以及交叉滚柱轴承相结合,可将承重轴承与双杆和活塞密封件的运动隔离开来。橡胶缓冲器或减震器可停止滑台,并可与行程调节器配对以进行精确定位;可用于伸展、缩回或两端,范围为 0-5 mm、0-15 mm 和 0-25 mm。端部锁定选件可防止滑台在垂直应用中掉落,从而在气压损失时提高安全性。

孔径: 6, 8, 12, 16, 20, 25 mm
带行程调节器的橡胶缓冲器
减震器选项
气压损失时的端部锁定选项
PTFE 润滑脂或食品级润滑脂选项
符合 RoHS 标准
支持自动切换

●和操作台紧密结合
●最适用于精密组装的气动滑台
●高刚性、高精度
●由于采用十字滚柱导轨,可实现无松动的平稳运动
●小型、轻量
●采用双联,输出是以前气缸的2倍
字段描述 字段取值 MXS20-100B取值描述
缸径 20 缸径 20mm
通口螺纹的种类 M螺纹(Φ6~Φ16),Rc(Φ20~Φ25)
气缸行程 100 气缸行程 100mm
调整器可选品种 B 两端缓冲器
功能可选项 标准
磁性开关型号 无磁性开关
磁性开关个数 2个 或 无
订制规格 标准

MXS20-100B其他特性

字段描述 MXS20-100B取值描述
形式 气压式
内置磁环 无 / 内置磁环
安装方式 基本型
配管口径 1/8
使用流体 空气
作动方式 双作用
最低使用压力 0.15 MPa
最高使用压力 0.7 MPa
保证耐压力 1.05 MPa
环境温度 -10℃~60℃
使用活塞速度 50~500 mm/s
给油 不给油式
行程长度允许差 0~+1 mm
0.2MPa理论推力OUT 126 N
0.3MPa理论推力OUT 188 N
0.4MPa理论推力OUT 251 N
0.5MPa理论推力OUT 314 N
0.6MPa理论推力OUT 377 N
0.7MPa理论推力OUT 440 N
0.2MPa理论推力IN 94 N
0.3MPa理论推力IN 141 N
0.4MPa理论推力IN 188 N
0.5MPa理论推力IN 236 N
0.6MPa理论推力IN 283 N
0.7MPa理论推力IN 330 N

 

MXS20-100B Precision Slide Table (Cross Roller Bearings) – Standard Type
The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

Bore sizes: 6, 8, 12, 16, 20, 25 mm
Rubber bumper with stroke adjuster
Shock absorber option
End lock option in the event of air pressure loss
PTFE grease or food grade grease option
RoHS compliant
Auto switch capable